Place of Origin:
Guangdong, China (Mainland)
Brand Name:
PARKOO
Certification:
CE, EMC, GS, RoHS, SASO, UL, UR, CCC
Model Number:
CFB6.0D
Contact Us
1. Functions
2. Parameters
| Article No. | CFB6.0D |
| Article Name | Industrial Dehumidifier |
| Dehumidification capacity | 6Kg/h |
| Applying Area(with three meters height) | 150~180M² |
| Voltage | 220V~50Hz |
| Rated Power | 2000W |
| Air Circulation | 1500M³/H |
| Refrigerant | R22 |
| N.W.(KG) | 80KGS |
| Model Dimension | 972*330*1000MM |
The displacement required for R-22 is 60% of that required for R-12.This means that for a given compressor rate, the system using refrigerant R-22 generated 65% more cooling capacity than the system using refrigerant R-12.
Higher cooling efficiency and lower power consumption are important in large industrial applications.Insoluble impurity in refrigerant requires that refrigerant has certain water absorption. When little water penetrates into refrigerant, ice jam will occur at low temperature and affect the normal operation of refrigeration system.The refrigerant R-22 absorbs more water than R-12, which is important in cryogenic applications.
In the process of transportation and placement of industrial dehumidifier, there will inevitably be vibration, roll and other actions, resulting
in the displacement of refrigerant in the compressor.If the machine is turned on at this time, the compressor will not work normally, the noise
will be large, and the dehumidification efficiency will be relatively low.Therefore, it is necessary to stand the dehumidifier for a period of
time, so that the refrigerant in the compressor can be reflux in place before it is used.
After opening the dehumidifier, it should be kept in standby state as far as possible, and do not open and close frequently, so as to greatly
reduce the damage to the machine performance and not waste a lot of electricity.After power failure, it is necessary to turn off the power
immediately to prevent the sudden power call and the sudden impact of large current on the dehumidifier and damage the dehumidifier.
In terms of placement, it is recommended to place the dehumidifier in a place with air circulation and flat ground, and put it next to the
wall.In this way, the moist air is pumped into the dehumidifier as soon as possible, and the dry air can be quickly circulated to all corners of
the workshop to achieve better dehumidification effect.
Send your inquiry directly to us
